Species divergence in valleys: the phylogeny of Phrynocephalus forsythii complex and description of a new species.

Background: Geographic isolation caused by high-altitude valleys promotes the formation of geographic segregation of species, leading to species differentiation. The subgenus Oreosaura contains viviparous species from the Tibetan Plateau and the vicinity of the Tarim Basin, which can be divided into three species complexes according to their geographical distribution: Phrynocephalus vlangalii, Phrynocephalus theobaldi, and Phrynocephalus forsythii. However, molecular data for the P. forsythii complex are limited and the diversity of this species complex has been greatly underestimated. Therefore, this study aimed to explore the species diversity of Oreosaura and species differentiation within the P. forsythii complex. Methods: We analysed the species diversity of Oreosaura by combining previous data, constructed a phylogenetic tree of the subgenus based on cytochrome c oxidase subunit I and 16S sequences, and estimated the divergence time. Results: The results suggest significant genetic differences between the Tarim Basin populations and adjacent mountain valley populations of the P. forsythii complex and that the combination of deep valley landscapes in the high mountains and ice-age events have contributed to the differentiation of the viviparous toad-headed agama lizard, which is a key factor in the phylogenetics of the P. forsythii complex. Furthermore, we identified a population collected from Wuqia County, Xinjiang, as a new species, Phrynocephalus kangsuensis sp. nov. The results will provide data for phylogenetic studies following the P. forsythii complex and help demonstrate that valleys promote the formation of Phrynocephalus species.

On the elephant trails: habitat suitability and connectivity for Asian elephants in eastern Indian landscape.

Identifying suitable habitats and conserving corridors are crucial to the long-term conservation of large and conflict-prone animals. Being a flagship species, survival of Asian elephants is threatened by human-induced mortality and habitat modification. We aimed to assess the habitat suitability and connectivity of the Asian elephant Elephas maximus Linnaeus, 1758 habitat in the state of Odisha in eastern India. We followed the ensemble of spatial prediction models using species presence data and five environmental variables. We used least-cost path and circuit theory approaches to identify the spatial connectivity between core habitats for Asian elephants. The results revealed that normalized difference vegetation index (NDVI; variable importance 42%) and terrain ruggedness (19%) are the most influential variables for predicting habitat suitability of species within the study area. Our habitat suitability map estimated 14.6% of Odisha's geographical area (c. 22,442 km2) as highly suitable and 13.3% (c. 20,464 km2) as moderate highly suitable. We identified 58 potential linkages to maintain the habitat connectivity across study area. Furthermore, we identified pinch points, bottlenecks, and high centrality links between core habitats. Our study offers management implications for long-term landscape conservation for Asian elephants in Odisha and highlights priority zones that can help maintain spatial links between elephant habitats.

Environmental impact of hybrid (reusable/single-use) ports versus single-use equivalents in robotic surgery.

Given the rise in robotic surgery, and parallel movement towards net zero carbon, sustainable healthcare systems, it is important that the environmental impact of robotic approaches is minimised. The majority of greenhouse gas emissions associated with robotic surgery have previously been associated with single-use items. Whilst switching from single-use products to hybrid equivalents (predominantly reusable, with a small single-use component) has previously been found to reduce the environmental impact of a range of products used for laparoscopic surgery, the generalisability of this to robotic surgery has not previously been demonstrated. In this life cycle assessment, use of hybrid 5 mm ports compatible with emerging robotic systems (143 g CO2e) was found to reduce the carbon footprint by 83% compared with using single-use equivalents (816 g CO2e), accompanied by reductions in fifteen out of eighteen midpoint environmental impact categories. For endpoint categories, there was an 81% reduction in impact on human health and species loss, and 82% reductions in resource depletion associated with using hybrid robotic 5 mm ports. Whilst the carbon footprint of 5 mm hybrid ports compatible with emerging robotic equipment was 70% higher than previous estimates of ports appropriate for conventional laparoscopic approaches, the six-fold reductions seen with hybrids in this analysis point to the generalisability of the finding that reusable or hybrid products have a lower carbon footprint when compared with single-use equivalents. Surgeons, procurement teams, and policy makers should encourage innovation towards clinically safe and effective robotic instruments with maximal reusable components.

Microplastic pollution in the Chapora River, Goa, Southwest India: spatial distribution and risk assessment.

The amount of information available on the microplastic (MP) contamination in Goa's riverine water systems is currently limited. The abundance, size, colour, and polymer composition of microplastics in Chapora River surface water were investigated in this study. MPs in Chapora River surface water ranged from 0.1 particles/L (station 13) to 0.47 particles/L (station 5). The mean (± standard deviation) MP concentration was 0.25 (± 0.13) particles/L. Fibre was the dominant shape (77.15%), followed by fragments (12.36%), films (9.36%), and foam (1.12%). Most MPs were found in the 0.1-0.3 mm size range, then in the 0.3-1 mm and 1-5 mm. The dominant type of polymer studied was polyethylene terephthalate (PET; 46%), followed by high-density polyethylene (HDPE; 14%), polypropylene (PP; 5%), and polystyrene (PS; 1%). The risk assessment study indicated high risk with respect to PHI, while PLI shows low risk in the area. The source of MPs was mostly anthropogenic in nature in the region. When compared with other tropical rivers, MP pollution was relatively lower in the Chapora River. Nevertheless, the baseline data will help the local administration take mitigation measures to reduce the impact of MP pollution in the region.

Agreement between a web collaborative dataset and an administrative dataset to assess the retail food environment in Mexico.

BACKGROUND: Latin American countries are often limited in the availability of food outlet data. There is a need to use online search engines that allow the identification of food outlets and assess their agreement with field observations. We aimed to assess the agreement in the density of food outlets provided by a web collaborative data (Google) against the density obtained from an administrative registry. We also determined whether the agreement differed by type of food outlet and by area-level socioeconomic deprivation. METHODS: In this cross-sectional study, we analyzed 1,693 census tracts from the municipalities of Hermosillo, Leon, Oaxaca de Juarez, and Tlalpan. The Google service was used to develop a tool for the automatic acquisition of food outlet data. To assess agreement, we compared food outlet densities obtained with Google against those registered in the National Statistical Directory of Economic Units (DENUE). Continuous densities were assessed using Bland-Altman plots and concordance correlation coefficient (CCC), while agreement across tertiles of density was estimated using weighted kappa. RESULTS: The CCC indicated a strong correlation between Google and DENUE in the overall sample (0.75); by food outlet, most of the correlations were from negligible (0.08) to moderate (0.58). The CCC showed a weaker correlation as deprivation increased. Weighted kappa indicated substantial agreement between Google and DENUE across all census tracts (0.64). By type of food outlet, the weighted kappa showed substantial agreement for restaurants (0.69) and specialty food stores (0.68); the agreement was moderate for convenience stores/small food retail stores (0.49) and fair for candy/ice cream stores (0.30). Weighted kappa indicated substantial agreement in low-deprivation areas (0.63); in very high-deprivation areas, the agreement was moderate (0.42). CONCLUSIONS: Google could be useful in assessing fixed food outlet densities as a categorical indicator, especially for some establishments, like specialty food stores and restaurants. The data could also be informative of the availability of fixed food outlets, particularly in less deprived areas.

Spatiotemporal variations, health risk assessment, and sources of potentially toxic elements in potamic water of the Anday Stream Basin (Türkiye), Black Sea Region.

Monitoring and protecting freshwater habitats are paramount for a sustainable water management perspective. This study investigated potentially toxic elements (PTEs) in the potamic water of the Anday Stream Basin (Türkiye), Black Sea Region, for a hydrological year (from May 2020 to April 2021). Among PTEs, the highest average values were recorded for sodium (Na) at 41.3 mg/L and the lowest for mercury (Hg) at 0.009 µg/L and noted under quality guidelines. The stream was found to be at the level of "Low Heavy Metal Pollution" and "Low Contamination" based on the ecotoxicological risk indices. The highest calculated hazard quotient (HQ) value of 1.21E-02 for Cd was noted in the children via the dermal pathway and the lowest of 6.91E-06 for Fe in adults via the ingestion pathway. Results revealed a higher hazard index (HI) value of 1.50E-02 for Cd to children and the lowest of 1.98E-05 for Fe to adults. As a result of applying agricultural risk indices, the stream showed sodium adsorption ratio values less than 6 and was found to be "Excellent" for agriculture. However, the sodium percentage values were less than 20 and found "Permissible" and the magnesium hazard > 50 and noted as "Unsuitable" for agriculture. Statistical analysis revealed that natural factors mainly attributed to PTE contamination of the Anday Stream Basin.

Health risk assessment of heavy metals in some vegetables-Erbil City-Kurdistan Region of Iraq.

Heavy metals can have significant impacts on human health due to their toxicity and potential to accumulate in the body over time. Some heavy metals, such as lead, cadmium, mercury, and arsenic, are particularly harmful even at low concentrations. The estimation of hazards of vegetable intake to human health as well as explore the of heavy metals accumulation in different vegetables (cucumbers, tomato, eggplant, and bell peppers) collected in Erbil city from different source locally and imported from nearby country are conducted. The heavy metals concentration (cooper, zinc, lead and cadmium) was measured and analyzed by inductively coupled plasma-optical emission spectrophotometry. The maximum concentration of Pb was 27.95 mg/kg and the minimum was 6.49 mg/kg; for Cd, the concentration was 1.43 and 0.99 mg/kg, 74.94 and 5.14 mg/kg for Zn; and for Cu, the result was 56.25 and 8.2 mg/kg for the maximum and minimum, which they are within limits described by Food Agricultural Organization, but more than health limits and health risks calculated by mean of hazard quotient (HQ) techniques for Cu and Pb which they are more than 1. The local sample that collected in Erbil city show less concentration of heavy metals and low HQ in comparison with imported samples. The carcinogenic risk study shows elevated risk of accumulative consuming of edible part of those plant which they exceed the permissible limit that is 10-6.

Pollution levels and probability risk assessment of potential toxic elements in soil of Pb-Zn smelting areas.

Soil pollution around Pb-Zn smelters has attracted widespread attention around the world. In this study, we compiled a database of eight potentially toxic elements (PTEs) Pb, Zn, Cd, As, Cr, Ni, Cu, and Mn in the soil of Pb-Zn smelting areas by screening the published research papers from 2000 to 2023. The pollution assessment and risk screening of eight PTEs were carried out by geo-accumulation index (Igeo), potential ecological risk index (PERI) and health risk assessment model, and Monte Carlo simulation employed to further evaluate the probabilistic health risks. The results suggested that the mean values of the eight PTEs all exceeded the corresponding values in the upper crust, and more than 60% of the study sites had serious Pb and Cd pollution (Igeo > 4), with Brazil, Belgium, China, France and Slovenia having higher levels of pollution than other regions. Besides, PTEs in smelting area caused serious ecological risk (PERI = 10912.12), in which Cd was the main contributor to PREI (86.02%). The average hazard index (HI) of the eight PTEs for adults and children was 7.19 and 9.73, respectively, and the average value of total carcinogenic risk (TCR) was 4.20 × 10-3 and 8.05 × 10-4, respectively. Pb and As are the main contributors to non-carcinogenic risk, while Cu and As are the main contributors to carcinogenic risk. The probability of non-carcinogenic risk in adults and children was 84.05% and 97.57%, while carcinogenic risk was 92.56% and 79.73%, respectively. In summary, there are high ecological and health risks of PTEs in the soil of Pb-Zn smelting areas, and Pb, Cd, As and Cu are the key elements that cause contamination and risk, which need to be paid attention to and controlled. This study is expected to provide guidance for soil remediation in Pb-Zn smelting areas.

Estimation and evaluation of the risks of protozoa infections associated to the water from a treatment plant in southern Brazil using the Quantitative Microbiological Risk Assessment Methodology (QMRA).

In this study, the Quantitative Microbial Risk Assessment (QMRA) methodology was applied to estimate the annual risk of Giardia and Cryptosporidium infection associated with a water treatment plant in southern Brazil. The efficiency of the treatment plant in removing protozoa and the effectiveness of the Brazilian legislation on microbiological protection were evaluated, emphasizing the relevance of implementing the QMRA in this context. Two distinct approaches were employed to estimate the mechanical removal of protozoa: The definitions provided by the United States Environmental Protection Agency (USEPA), and the model proposed by Neminski and Ongerth. Although the raw water collected had a higher concentration of Giardia cysts than Cryptosporidium oocysts, the estimated values for the annual risk of infection were significantly higher for Cryptosporidium than for Giardia. From a general perspective, the risk values of protozoa infection were either below or very near the limit set by the World Health Organization (WHO). In contrast, all the risk values of Cryptosporidium infection exceeded the threshold established by the USEPA. Ultimately, it was concluded that the implementation of the QMRA methodology should be considered by the Brazilian authorities, as the requirements and guidelines provided by the Brazilian legislation proved to be insufficient to guarantee the microbiological safety of drinking water. In this context, the QMRA application can effectively contribute to the prevention and investigation of outbreaks of waterborne disease.

Effect of pH on the ozonolysis degradation of p-nitrophenol in aquatic environment and the synergistic effect of hydroxy radical.

Density functional theory (DFT) was employed to elucidate the mechanisms for ozonolysis reaction of p-nitrophenol (PNP) and its anion form aPNP. Thermodynamic data, coupled with Average Local Ionization Energies (ALIE) analysis, reveal that the ortho-positions of the OH/O- groups are the most favorable reaction sites. Moreover, rate constant calculations demonstrate that the O3 attack on the C2-C3 bond is the predominant process in the reaction between neutral PNP and O3. For the aPNP + O3 reaction, the most favorable pathways involve O3 attacking the C1-C2 and C6-C1 bonds. The rate constant for PNP ozonolysis positively correlates with pH, ranging from 5.47 × 108 to 2.86 × 109 M-1 s-1 in the natural aquatic environment. In addition, the formation of hydroxyl radicals in the ozonation process of PNP and the mechanisms of its synergistic reaction of PNP with ozone were investigated. Furthermore, the ozonation and hydroxylation processes involving the intermediate OH-derivatives were both thermodynamically and kinetic analyzed, which illustrate that OH radicals could promote the elimination of PNP. Finally, the toxic of PNP and the main products for fish, daphnia, green algae and rat were assessed. The findings reveal that certain intermediates possess greater toxicity than the original reactant. Consequently, the potential health risks these compounds pose to organisms warrant serious consideration.

Automatic identification of incidents involving potential serious injuries and fatalities (PSIF).

Safety incidents have always been a crucial risk in work spaces, especially industrial sites. In the last few decades, significant efforts have been dedicated to incident control measures to reduce the rate of safety incidents. Despite all these efforts, the rate of decline in serious injuries and fatalities (SIFs) has been considerably lower than the rate of decline for non-critical incidents. This observation has led to a change of risk reduction paradigm for safety incidents. Under the new paradigm, more focus has been allocated to reducing the rate of critical/SIF incidents, as opposed to reducing the count of all incidents. One of the challenges in reducing the number of SIF incidents is the proper identification of the risk prior to materialization. One of the reasons for risk identification being a challenge is that companies usually only focus on incidents where SIF did occur reactively, and incidents that did not cause SIF but had the potential to do so go unnoticed. Identifying these potentially significant incidents, referred to as potential serious injuries and fatalities (PSIF), would enable companies to work on identifying critical risk and taking steps to prevent them preemptively. However, flagging PSIF incidents requires all incident reports to be analyzed individually by experts and hence significant investment, which is often not affordable, especially for small and medium sized companies. This study is aimed at addressing this problem through machine learning powered automation. We propose a novel approach based on binary classification for the identification of such incidents involving PSIF (potential serious injuries and fatalities). This is the first work towards automatic risk identification from incident reports. Our approach combines a pre-trained transformer model with XGBoost. We utilize advanced natural language processing techniques to encode an incident record comprising heterogeneous fields into a vector representation fed to XGBoost for classification. Moreover, given the scarcity of manually labeled incident records available for training, we leverage weak labeling to augment the label coverage of the training data. We utilize the F2 metric for hyperparameter tuning using Tree-structured Parzen Estimator to prioritize the detection of PSIF records over the avoidance of non-PSIF records being mis-classified as PSIF. The proposed methods outperform several baselines from other studies on a significantly large test dataset.

Seasonal patterns, fate and ecological risk assessment of pharmaceutical compounds in a wastewater treatment plant with Bacillus bio-reactor treatment.

Pharmaceutical compounds (PhCs) pose a growing concern with potential environmental impacts, commonly introduced into the environment via wastewater treatment plants (WWTPs). The occurrence, removal, and season variations of 60 different classes of PhCs were investigated in the baffled bioreactor (BBR) wastewater treatment process during summer and winter. The concentrations of 60 PhCs were 3400 ± 1600 ng/L in the influent, 2700 ± 930 ng/L in the effluent, and 2400 ± 120 ng/g dw in sludge. Valsartan (Val, 1800 ng/L) was the main contaminant found in the influent, declining to 520 ng/L in the effluent. The grit chamber and BBR tank were substantially conducive to the removal of VAL. Nonetheless, the BBR process showcased variable removal efficiencies across different PhC classes. Sulfadimidine had the highest removal efficiency of 87 ± 17% in the final effluent (water plus solid phase). Contrasting seasonal patterns were observed among PhC classes within BBR process units. The concentrations of many PhCs were higher in summer than in winter, while some macrolide antibiotics exhibited opposing seasonal fluctuations. A thorough mass balance analysis revealed quinolone and sulfonamide antibiotics were primarily eliminated through degradation and transformation in the BBR process. Conversely, 40.2 g/d of macrolide antibiotics was released to the natural aquatic environment via effluent discharge. Gastric acid and anticoagulants, as well as cardiovascular PhCs, primarily experienced removal through sludge adsorption. This study provides valuable insights into the intricate dynamics of PhCs in wastewater treatment, emphasizing the need for tailored strategies to effectively mitigate their release and potential environmental risks.

A web-based pesticide risk assessment tool for drinking water protection zones in Sweden.

To protect human health, wildlife and the aquatic environment, "safe uses" of pesticides are determined at the EU level while product authorization and terms of use are established at the national level. In Sweden, extra precaution is taken to protect drinking water, and permits are therefore required for pesticide use within abstraction zones. This paper presents MACRO-DB, a tool for assessing pesticide contamination risks of groundwater and surface water, used by authorities to support their decision-making for issuing such permits. MACRO-DB is a meta-model based on 583,200 simulations of the physically-based MACRO model used for assessing pesticide leaching risks at EU and national level. MACRO-DB is simple to use and runs on widely available input data. In a qualitative comparative assessment for two counties in Sweden, MACRO-DB outputs were in general agreement with groundwater monitoring data and matched or were more protective than the national risk assessment procedure for groundwater.

Ecological risk assessment of heavy metals in desulfurized seawater discharged from a coal-fired power plant in Qingdao.

Despite the prevalence of discharge of large volumes of heavy-metal-bearing seawater from coal-fired power plants into adjacent seas, studies on the associated ecological risks remain limited. This study continuously monitored concentrations of seven heavy metals (i.e. As, Cd, Cr, Cu, Hg, Pb, and Zn) in surface seawater near the outfall of a coal-fired power plant in Qingdao, China over three years. The results showed average concentrations of As, Cd, Cr, Cu, Hg, Pb, and Zn of 2.63, 0.33, 2.97, 4.63, 0.008, 0.85, and 25.00 µg/L, respectively. Given the lack of data on metal toxicity to local species, this study investigated species composition and biomass near discharge outfalls and constructed species sensitivity distribution (SSD) curves with biological flora characteristics. Hazardous concentrations for 5% of species (HC5) for As, Cd, Cr, Cu, Hg, Pb, and Zn derived from SSDs constructed from chronic toxicity data for native species were 3.23, 2.22, 0.06, 2.83, 0.66, 4.70, and 11.07 µg/L, respectively. This study further assessed ecological risk of heavy metals by applying the Hazard Quotient (HQ) and Joint Probability Curve (JPC) based on long-term heavy metal exposure data and chronic toxicity data for local species. The results revealed acceptable levels of ecological risk for As, Cd, Hg, and Pb, but unacceptable levels for Cr, Cu, and Zn. The order of studied heavy metals in terms of ecological risk was Cr > Cu ≈ Zn > As > Cd ≈ Pb > Hg. The results of this study can guide the assessment of ecological risk at heavy metal contaminated sites characterized by relatively low heavy metal concentrations and high discharge volumes, such as receiving waters of coal-fired power plant effluents.

Characterization of VOC emissions and health risk assessment in the plastic manufacturing industry.

Volatile organic compounds (VOCs) significantly contribute to ozone pollution formation, and many VOCs are known to be harmful to human health. Plastic has become an indispensable material in various industries and daily use scenarios, yet the VOC emissions and associated health risks in the plastic manufacturing industry have received limited attention. In this study, we conducted sampling in three typical plastic manufacturing factories to analyze the emission characteristics of VOCs, ozone formation potential (OFP), and health risks for workers. Isopropanol was detected at relatively high concentrations in all three factories, with concentrations in organized emissions reaching 322.3 µg/m3, 344.8 µg/m3, and 22.6 µg/m3, respectively. Alkanes are the most emitted category of VOCs in plastic factories. However, alkenes and oxygenated volatile organic compounds (OVOCs) exhibit higher OFP. In organized emissions of different types of VOCs in the three factories, alkenes and OVOCs contributed 22.8%, 67%, and 37.8% to the OFP, respectively, highlighting the necessity of controlling them. The hazard index (HI) for all three factories was less than 1, indicating a low non-carcinogenic toxic risk; however, there is still a possibility of non-cancerous health risks in two of the factories, and a potential lifetime cancer risk in all of the three factories. For workers with job tenures exceeding 5 years, there may be potential health risks, hence wearing masks with protective capabilities is necessary. This study provides evidence for reducing VOC emissions and improving management measures to ensure the health protection of workers in the plastic manufacturing industry.

Revisiting the relationship between natural resources and environmental quality- can ICT break the "resource curse" in the environment?

Despite the prevalence of discussions on the "resource curse", the impact of natural resources on environmental quality for better or for worse has not been clearly answered, this study aims to answer the question by introducing the role of Information and Communication Technologies (ICT). To that end, by using the Instrumental Variable Generalized Method of Moments (IV GMM) estimator and a sample of 102 developing and emerging economies from 2006 to 2016, this paper studies the impact of ICT on the relationship between natural resources and environmental quality. Specially, the Environmental Performance Index (EPI) captures the environmental quality. The results show that natural resources have a significant negative effect on EPI, specially, EPI decreases by one unit with a 1% increase in natural resource rents. ICT significantly mitigates this adverse effect, and marginal effects analysis further confirms its positive moderate effects. The results proved to be robust by Lewbel 2SLS and Driscoll-Kraay techniques or other robust tests. It is noteworthy that the adverse effect of natural resources on EPI is greater and the mitigating effect of ICT is more pronounced in low-income countries and lower-middle income countries. Overall, these results remind resource-based countries to vigorously develop ICT, and apply intelligent exploration, digital monitoring, or other digital technologies to realize the high-efficiency use of natural resources, reducing environmental pollution and ecological damage.

[Resources and utilization of medicinal plants in countries and regions involved in "the Belt and Road" Initiative].

The protection, development, and utilization of medicinal plant resources are important cornerstones of maintaining human health. However, due to factors such as the reduction of high-quality land resources, deterioration of ecological environments, and excessive and disorderly resource development, medicinal plant resources are becoming scarce, and some of them are insufficiently supplied. With the proposal of "the Belt and Road" Initiative, the cooperation between China and "the Belt and Road" partners(the countries and regions involved in "the Belt and Road" Initiative)is increasingly close, which provides a new opportunity for carrying out trade of medicinal plant resources and alleviating the problem of imbalance and relative inadequacy of medicinal plant resources in countries. This study first determined the distribution and species information of plant resources in countries and regions involved in "the Belt and Road" Initiative by investigating the database of plant distribution and that of medicinal plant resources. Then, according to the published data from the International Union for Conservation of Nature(IUCN) and the Convention on International Trade in Endangered Species of Wild Fauna and Flora(CITES), this study identified the rare and endangered medicinal plants and the medicinal plants under trade control in countries and regions involved in "the Belt and Road" Initiative and finally sorted out the list of potential medicinal plant resources in countries and regions involved in "the Belt and Road" Initiative that can be used by China. This data resource can not only be used for the overall protection of important endangered species but also scientifically guide the development and utilization of medicinal resources, providing guidance and a theoretical basis for the sustainable development of medicinal plant resources in countries and regions involved in "the Belt and Road" Initiative.

[Scientific connotation of temperature control in processing of Chinese medicinal materials based on theory of quality evaluation through morphological identification].

Processing of Chinese medicinal materials is an important part in the Chinese medicine heritage, and the temperature control in the processing has a direct impact on the quality and efficacy of traditional Chinese medicines. However, the processing of Chinese medicinal materials has the problems of subjective temperature judgement, determination of the end point based on experience, unclear processing mechanism, unstable quality of products, and inconsistent processing standards. The temperature control in the processing is reflected in the appearance and internal quality of Chinese medicinal materials. The theory of quality evaluation through morphological identification is developed based on the comprehensive evaluation of the shape, color, taste, and components, which is associated with the temperature control in the processing. To solve the problems above, this paper puts forward the following solutions. The first is literature mining. By review of the ancient medical works and pharmaceutical experience, the temperature control in processing and the evolution of processing methods can be revealed. Second, according to the ancient method, the processing principle can be explored, on the basis of which the processing technology can be innovated. Third, the standard operating procedure(SOP) should be established to quantify the fire temperature, providing a theoretical basis for the formulation of Chinese medicinal material processing standards. Moreover, it provides a basis for improving the quality of processed products and increasing the safety and effectiveness of traditional Chinese medicines.